产品别名 |
混凝土井体模具,预制井体钢模具,井体钢模具,河北宏旭模具 |
面向地区 |
全国 |
混凝土井体模具
混凝土井体模具生产预制井体模具，井体模具，井体钢模具，预制井体钢模具，混凝土井体模具，混凝土井体钢模具，路基边沟盖板塑料模具，花砖塑料模具等各种塑料模具和钢模具。
混凝土井体模具平常要怎么清洗呢?先是模具表面灰尘的清扫:用干净的抹布抹完之后，用手摸模具表面，如果感觉不到有灰尘的话，那么就是合格。冲孔部位的清扫:用锤子把孔内的废料还有滑料板上粘着的废料和刃口部位切废料的残屑全部清除掉。有镀层的模具，对模具的拉伸表面进行清扫，用手来确认表面是否光洁，生产时的材料用抹布抹干净，生产后，给模具涂上少许的油。还有就是装模前要对模具的上下表面进行清擦，模具安装面和压机工作台面不受压伤及模具在生产中上下安装面的平行度。模具装好后将模具打开，将模具各部分清擦干净，特别是导向机构，对于表面件模具，其型面清擦干净，以制件的质量，这就是有关模具的平时的清洗地介绍。
混凝土井体模具 井体模具 井体钢模具 预制井体钢模具
Concrete well mold specializes in the production of prefabricated well mold, well mold, well steel mold, prefabricated well steel mold, concrete well mold, concrete well steel mold, subgrade side ditch cover plastic mold, tile plastic mold and other plastic mold and steel mold.
How to clean the concrete well mold? First, clean the dust on the mold surface: after wiping with a clean cloth, touch the mold surface with your hand. If there is no dust, it is qualified. Cleaning of punching part: use a hammer to remove all the scraps in the hole, the scraps stuck on the sliding plate and the scraps cut at the cutting edge. For the coated mold, the drawing surface of the mold must be cleaned, and the surface must be confirmed to be smooth by hand. The materials during production must be wiped clean with a rag. After production, the mold must be coated with a little oil. The other is to clean the upper and lower surfaces of the mould before the mould is installed to ensure that the mould mounting surface and the working surface of the press are not damaged by pressure and the parallelism of the upper and lower mounting surfaces of the mould in production. After the mold is installed, open the mold and clean all parts of the mold, especially the guide mechanism. For the surface part mold, the mold surface is cleaned to ensure the quality of the parts. This is the introduction of the usual cleaning of the mold.
最近来访记录
近期浏览
